Honda CBR1100XX Blackbird 1997–2007 Plastic Fairing Push Clip Kit — 13x 91549-MW0-790ZA
£12.99
13x plastic fairing push clips for the listed original Blackbird bodywork mounting positions. For Honda CBR1100XX Blackbird 1997–2007. Bolts, other clip types and fairing panels are not included.
Also included: 1x Biker Bling anti-seize compound pack (7 g).
Free UK delivery for orders sent to a UK address.
Returns: UK consumers buying online can normally cancel within 14 days of receiving goods and return them within a further 14 days. Read our returns policy.
Plastic Fairing Push Clip Kit — 13x 91549-MW0-790ZA for Honda CBR1100XX Blackbird
13x plastic fairing push clips for the listed original Blackbird bodywork mounting positions. For the original mounting arrangement on the Honda CBR1100XX Blackbird 1997–2007.
Close OEM-style fit and appearance
These aftermarket push clips match the original fixing type and fitting dimensions for the corresponding fairing holes. They are plastic rivet-style clips, not stainless steel bolts. Match the clip reference and the original panel arrangement before fitting.
These are Biker Bling aftermarket replacements, not genuine Honda-branded parts. Honda references identify the original components being replaced.
What you receive
- 13x plastic fairing push clips — replacement for 91549-MW0-790ZA.
- 1x Biker Bling anti-seize compound pack (7 g).
Original Honda fixing references
| Fitting position / component | Kit quantity | Honda reference |
|---|---|---|
| Plastic fairing push clips | 13x | 91549-MW0-790ZA |
Important fitment notes
- For Honda CBR1100XX Blackbird 1997–2007 with the original components at the listed positions.
- Check the original reference and fitting arrangement, especially with aftermarket screens, panels or modified components.
- Bolts, other clip types and fairing panels are not included.
When should you replace these fixings?
Inspect fixings when removing the relevant component. Replace missing hardware or damaged heads, threads, clips or rubber fittings with the correct type. New fixings cannot repair cracked panels, enlarged holes or damaged mounting threads.
Fitting information
Match each fixing to its intended position and start threaded fasteners by hand. Align the components before tightening; do not use a bolt to pull a misaligned panel into place. Follow Honda’s instructions and avoid overtightening plastic or rubber mountings. Use anti-seize only where the applicable procedure permits it. Check the fitted components are properly seated and secure.
For general background, read our guide to fitting motorcycle fairing bolts. Honda’s workshop procedure takes precedence.
Customer questions
Does this include the smaller 90657-SB0-003 clips?
No. This pack supplies only 13x clips replacing 91549-MW0-790ZA.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.