Aprilia ETV1000 Caponord 2001–2007 Top and Bottom Yoke Pinch Bolt Kit
£12.99
6x stainless steel replacement pinch bolts for the top and bottom steering yokes on the Aprilia ETV1000 Caponord 2001–2007. The kit covers the fork-leg clamping positions in both yokes; handlebars and fork components are not included.
Free UK delivery for orders sent to a UK address.
Returns: UK consumers buying online can normally cancel within 14 days of receiving goods and return them within a further 14 days. Read our returns policy.
Top and bottom yoke pinch bolts for the Aprilia ETV1000 Caponord
This six-bolt kit replaces the pinch bolts securing the fork legs in the top and bottom steering yokes on the Aprilia ETV1000 Caponord 2001–2007. These are the yoke-to-fork clamping fasteners.
What you receive
- 6x stainless steel yoke pinch bolts for the original upper and lower yoke clamping positions.
The handlebars, fork legs and yokes are not included.
Original Aprilia part number this kit replaces
- AP8152289 – original steering-yoke pinch bolt, 6 used in the fiche.
The same reference and total quantity are shown in the 2001–2003 and 2004–2007 steering diagrams.
Model-specific aftermarket replacements: These bolts are selected for the original upper and lower yoke clamp positions on this Caponord. They are aftermarket replacements, not genuine Aprilia parts.
Head style and material: The supplied bolts are stainless steel. Their appearance may differ from the original hardware; keep each bolt in its intended clamping position.
When should you replace yoke pinch bolts?
- Corroded or rounded heads: Damaged drive recesses can make the bolts difficult to remove or refit correctly.
- Damaged threads or missing bolts: A complete set is needed to secure the fork legs as designed.
- During fork or steering service: Inspect the bolts and clamping surfaces whenever the fork legs are removed or repositioned.
Replacement bolts cannot repair damaged yoke threads, cracked components or fork legs that do not seat correctly.
Fitting the yoke pinch bolts
These fasteners secure the fork legs in the steering yokes. Follow Aprilia’s workshop procedure for fork position, tightening sequence and torque. Start each bolt by hand, seat the fork legs correctly and do not use a bolt to pull misaligned parts together. Before riding, check the steering moves freely and the front controls and wheel are correctly aligned. If a clamp, thread or replacement specification is in doubt, have the assembly checked before use.
For general installation precautions, read our stainless-steel motorcycle bolt fitting guide and motorcycle bolt strength grades guide.
| Weight | 127 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.