Top Yoke Pinch bolt kit for Honda CB500F

This model-specific kit supplies replacement bolts for the original top-yoke fork-clamping positions, one bolt at each fork leg on the Honda CB500F 2019–2021. Use the fixings only at their intended mounting positions.

What you receive

• 2x A2 (304) stainless steel replacement bolts for top-yoke fork-clamping positions.
• 1x Biker Bling anti-seize compound pack (7 g).

Fitting position	Supplied quantity	Original Honda fixing reference
Top-yoke fork-clamping positions	2x	90108-KZZ-900

The kit supplies 2x replacement bolts and one anti-seize pack. Honda references identify the original fixings, not Biker Bling product codes.

Important fitment notes

• For Honda CB500F model years 2019, 2020 and 2021 with the original mounting arrangement described above.
• Check modified assemblies against their manufacturer’s required hardware specification.
• Bottom-yoke bolts, handlebar clamp bolts, yokes and forks are not included.
• These are aftermarket replacement parts, not genuine Honda-branded components.
• Photographs may illustrate the fastener style; the contents table defines the supplied quantity.

Model-specific replacement bolts

Biker Bling selects these replacement fasteners for the listed original mounting positions. Match each bolt to its intended location; a shared thread or Honda reference does not establish suitability for other assemblies.

Materials: The bolts are A2 (304) stainless steel. Their head appearance may differ from Honda’s originals. The material name alone does not establish equivalent mechanical strength.

When should you replace top-yoke pinch bolts?

• Corroded or damaged heads: Inspect worn drive recesses before removal and refitting.
• Damaged threads or missing fixings: Check the bolt and mating threads before assembly.
• During servicing: Inspect the relevant mounting points while accessible.

Replacement bolts cannot repair cracked components, stripped threads or incorrectly seated assemblies.

Fitting the top-yoke pinch bolts

Support the motorcycle securely and follow Honda’s fork positioning, fastener specification, tightening order, thread condition and torque instructions for the upper yoke. Do not pull a misaligned assembly into place with a bolt. Check fork alignment and free steering movement before riding.

Use fitting compounds only where the applicable procedure specifies them. The included anti-seize pack is not an instruction to lubricate every fixing. Have damaged or uncertain mountings checked by a qualified motorcycle technician. For general background, read our motorcycle bolt strength grades guide. Honda’s workshop procedure takes precedence.

Customer questions

Does this include the bottom-yoke bolts?

No. This kit supplies two top-yoke bolts only, one for each side.