Brake Banjo Copper Sealing Washer Kit (12x) for Honda CB500F

This model-specific kit supplies 12x copper sealing washers for matching original brake-hose banjo connections on the Honda CB500F 2016–2018. These copper crush washers seal the mating faces of hydraulic banjo fittings; they are not ordinary flat washers.

What you receive

• 12x copper hydraulic sealing washers.
• 1x Biker Bling anti-seize compound pack (7 g).

Important fitment notes

• For Honda CB500F model years 2016, 2017 and 2018 with the original matching brake-hose arrangement.
• The original ABS banjo layout uses twelve washers across six connections. The non-ABS layout uses eight washers across four connections, leaving four spare in this twelve-washer pack. This is a washer-only kit; banjo bolts are not supplied.
• Aftermarket braided hoses or changed hydraulic components may require different hardware. Check the hose and component manufacturers’ specifications.
• Brake hoses, master cylinders, callipers, ABS units and other hydraulic components are not supplied.
• These are aftermarket replacement parts, not genuine Honda-branded components.
• Photographs illustrate the hardware style; the contents table defines the supplied quantities.

Model-specific replacement hardware

The Honda references identify the original hardware replaced at the stated positions, not Biker Bling product codes. Match the complete hose fitting, original reference and sealing arrangement. A shared motorcycle model or apparently matching thread does not establish suitability for every hydraulic fitting.

Materials: The sealing washers are copper, not stainless steel.

When should you replace banjo hardware?

• A connection has been opened: Renew the specified sealing washers during reassembly.
• Damaged hardware: Inspect the bolt, washer, hose fitting and mating surfaces.
• A leaking joint: Find and correct the cause rather than relying on additional tightening.

New hardware cannot repair a damaged hose fitting, cracked component or damaged sealing face.

Fitting information

Follow Honda’s workshop procedure for the exact connection, including washer placement, tightening, thread condition, hydraulic fluid and bleeding. Keep open connections clean and protect paintwork and friction surfaces from fluid spills. The anti-seize pack is not an instruction to lubricate hydraulic bolts or sealing washers. Check every disturbed joint for leaks and confirm correct brake operation before riding. Have uncertain hydraulic work completed or checked by a qualified motorcycle technician.

For general background, read our guide to motorcycle banjo bolts and copper sealing washers. Honda’s workshop procedure takes precedence.

Customer questions

Are the banjo bolts included?

No. It contains twelve copper sealing washers and one separate anti-seize pack.

Will this repair a leaking brake hose?

No. Inspect the hose, fitting and sealing faces and replace damaged components as required.