Stainless Steel Brake, Clutch and Switchgear Clamp Bolt Kit for Honda CBR1100XX Blackbird

8x stainless steel control fixings: 2x front brake holder bolts, 2x hydraulic clutch holder bolts and 4x switchgear housing fixings. For the original mounting arrangement on the Honda CBR1100XX Blackbird 1997–2007.

Close OEM-style fit and appearance

These replacements match the original fixing dimensions and head sizes for the stated control mounting positions. The four switchgear fixings have different lengths and must be matched to their original housing positions; they are not interchangeable with the holder bolts.

These are Biker Bling aftermarket replacements, not genuine Honda-branded parts. Honda references identify the original components being replaced.

What you receive

• 2x front brake master-cylinder holder bolts — replacement for 96001-06022-07.
• 2x hydraulic clutch master-cylinder holder bolts — replacement for 96001-06022-07.
• 1x switchgear housing fixing — replacement for 93892-05020-07.
• 1x switchgear housing fixing — replacement for 93892-05025-07.
• 1x switchgear housing fixing — replacement for 93892-05035-07.
• 1x switchgear housing fixing — replacement for 93892-05045-07.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Honda fixing references

Important fitment notes

• For Honda CBR1100XX Blackbird 1997–2007 with the original components at the listed positions.
• Check the original reference and fitting arrangement, especially with aftermarket screens, panels or modified components.
• Controls, levers, housings, lever pivot bolts, hydraulic banjo bolts, reservoir cap bolts and handlebar-to-fork bolts are not included.

When should you replace these fixings?

Inspect the separate holder and switchgear fixings when servicing controls. Damaged recesses, threads or missing hardware need the correct replacement. New bolts cannot repair cracked housings, damaged holders or stripped threads.

Fitting information

Match each fixing to its original position and follow Honda’s alignment, tightening order, torque and thread-condition instructions for that component. Keep wiring clear and use compounds only where specified. Before riding, confirm secure controls, normal brake and clutch operation, throttle return, switch functions and cable clearance throughout steering movement.

For general background, read our stainless steel motorcycle bolt fitting guide. Honda’s workshop procedure takes precedence.

Customer questions

Does this include the handlebar-to-fork clamp bolts?

No. This kit secures the brake and clutch holders and the switchgear housings to the handlebars.