Front Axle / Spindle Pinch Bolt Kit for Honda VFR1200F
These 4x front axle pinch bolts, also called spindle clamp bolts, are for the original lower-fork axle holder positions on the Honda VFR1200F 2011–2013. There are 2x at each fork leg. They are separate from the spindle itself, yoke pinch bolts and brake calliper mounting bolts.
What you receive
- 4x A2 (304) stainless steel front axle holder pinch bolts.
- 1x Biker Bling anti-seize compound pack (7 g).
| Fitting position | Bolt quantity |
|---|---|
| Left lower-fork axle holder | 2x |
| Right lower-fork axle holder | 2x |
| Total supplied | 4x |
Important fitment notes
- Compatibility: Designed for Honda VFR1200F model years 2011, 2012 and 2013 with the original front fork and axle holder arrangement.
- Verify before installing: Check the exact model and lower fork clamps, especially where forks, wheels or axle components have been replaced or modified.
- Aftermarket parts: These are aftermarket replacement parts, not genuine Honda-branded components. The supplied fasteners are A2 (304) stainless steel.
- Exclusions: The front axle, axle retaining bolt, wheel, fork components and brake calliper mounting bolts are not included. This is not a top/bottom yoke or handlebar clamp kit.
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Front lower-fork axle holder clamps | 4x | 90107-MGE-000 |
These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.
Model-specific aftermarket replacements: Biker Bling selects these aftermarket bolts for the original lower-fork front axle holder positions. The Honda cross-reference identifies those fixings and does not establish suitability for other steering, suspension or wheel mounting points.
Head style and materials: All 4x supplied bolts are A2 (304) stainless steel. The head appearance may differ from Honda’s originals. Stainless steel describes the material; it does not by itself prove equivalence to the original fasteners’ mechanical strength.
When should you replace front axle pinch bolts?
- Corroded or damaged fasteners: Inspect pinch bolts and clamp threads during front wheel servicing.
- Worn bolt heads: Damaged drive recesses can complicate removal and correct tightening.
- Wheel or fork maintenance: Check the fixing positions and axle holder condition before reassembly.
Cracked clamps, stripped threads or an incorrectly seated axle need appropriate repair. Replacement bolts do not make damaged fork components safe.
Fitting the front axle / spindle pinch bolts
- Support the motorcycle securely and follow Honda’s procedure for axle seating, wheel alignment, tightening order and torque for the exact model.
- Use thread treatments only where specified. The included anti-seize pack is not permission to lubricate these fixings.
- Confirm secure assembly, free wheel rotation and correct brake operation before riding.
- If the axle holder, threads or assembly procedure are uncertain, have a qualified motorcycle technician inspect the mounting.
For general background, read our motorcycle bolt strength grades guide.
Customer questions
Does this kit include the front axle or its retaining bolt?
No. It supplies 4x axle holder pinch bolts and 1x anti-seize compound pack (7 g). The spindle, axle retaining bolt, wheel and fork assemblies are not included.
What tightening sequence should I use?
Use Honda’s workshop procedure for the exact motorcycle and front axle assembly. This listing does not supply a universal tightening pattern or torque figure.





















Reviews
There are no reviews yet.