Honda CBR1100XX Blackbird 1999–2007 Stainless Steel Front Mudguard Nut Kit — 2x 61304-162-013
£8.99
2x stainless steel replacement nuts for the original front mudguard fixing positions. For Honda CBR1100XX Blackbird 1999–2007. Mudguard, bolts and other fittings are not included.
Also included: 1x Biker Bling anti-seize compound pack (7 g).
Free UK delivery for orders sent to a UK address.
Returns: UK consumers buying online can normally cancel within 14 days of receiving goods and return them within a further 14 days. Read our returns policy.
Stainless Steel Front Mudguard Nut Kit — 2x 61304-162-013 for Honda CBR1100XX Blackbird
2x stainless steel replacement nuts for the original front mudguard fixing positions. For the original mounting arrangement on the Honda CBR1100XX Blackbird 1999–2007.
Close OEM-style fit and appearance
Selected as close like-for-like aftermarket replacements for the original mudguard nuts, with matching fitting dimensions. Keep these nuts paired with the intended mudguard bolts rather than substituting rubber windscreen well nuts.
These are Biker Bling aftermarket replacements, not genuine Honda-branded parts. Honda references identify the original components being replaced.
What you receive
- 2x front mudguard nuts — replacement for 61304-162-013.
- 1x Biker Bling anti-seize compound pack (7 g).
Original Honda fixing references
| Fitting position / component | Kit quantity | Honda reference |
|---|---|---|
| Front mudguard nuts | 2x | 61304-162-013 |
Important fitment notes
- For Honda CBR1100XX Blackbird 1999–2007 with the original components at the listed positions.
- Check the original reference and fitting arrangement, especially with aftermarket screens, panels or modified components.
- Mudguard, bolts and other fittings are not included.
When should you replace these fixings?
Inspect fixings when removing the relevant component. Replace missing hardware or damaged heads, threads, clips or rubber fittings with the correct type. New fixings cannot repair cracked panels, enlarged holes or damaged mounting threads.
Fitting information
Match each fixing to its intended position and start threaded fasteners by hand. Align the components before tightening; do not use a bolt to pull a misaligned panel into place. Follow Honda’s instructions and avoid overtightening plastic or rubber mountings. Use anti-seize only where the applicable procedure permits it. Check the fitted components are properly seated and secure.
For general background, read our guide to fitting motorcycle fairing bolts. Honda’s workshop procedure takes precedence.
Customer questions
Does this include the mudguard bolts?
No. It contains two replacement nuts and the separately included anti-seize pack.
| Weight | 85 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.