Honda CBR1100XX Blackbird 1999–2007 Stainless Steel Fairing Bolt Kit — 4x 90112-MAT-000
£18.00
4x stainless steel shoulder fairing bolts with OEM-matching 22 mm heads and dimpled head-face detail. For Honda CBR1100XX Blackbird 1999–2007. Panels, washers, clips and other fairing bolts are not included.
Also included: 1x Biker Bling anti-seize compound pack (7 g).
Free UK delivery for orders sent to a UK address.
Returns: UK consumers buying online can normally cancel within 14 days of receiving goods and return them within a further 14 days. Read our returns policy.
Stainless Steel Fairing Bolt Kit — 4x 90112-MAT-000 for Honda CBR1100XX Blackbird
4x stainless steel shoulder fairing bolts with OEM-matching 22 mm heads and dimpled head-face detail. For the original mounting arrangement on the Honda CBR1100XX Blackbird 1999–2007.
Close OEM-style fit and appearance
The shoulder length and diameter, head size and Allen-key fitting match the original Honda fixing. The 22 mm head retains the original broad-head appearance, including the dimple detail. This four-bolt kit is for replacing selected matching fixings; the original layout uses five at the front fairing and two at the rear.
These are Biker Bling aftermarket replacements, not genuine Honda-branded parts. Honda references identify the original components being replaced.
What you receive
- 4x shoulder fairing bolts — replacement for 90112-MAT-000.
- 1x Biker Bling anti-seize compound pack (7 g).
Original Honda fixing references
| Fitting position / component | Kit quantity | Honda reference |
|---|---|---|
| Shoulder fairing bolts | 4x | 90112-MAT-000 |
Important fitment notes
- For Honda CBR1100XX Blackbird 1999–2007 with the original components at the listed positions.
- Check the original reference and fitting arrangement, especially with aftermarket screens, panels or modified components.
- Panels, washers, clips and other fairing bolts are not included.
When should you replace these fixings?
Inspect fixings when removing the relevant component. Replace missing hardware or damaged heads, threads, clips or rubber fittings with the correct type. New fixings cannot repair cracked panels, enlarged holes or damaged mounting threads.
Fitting information
Match each fixing to its intended position and start threaded fasteners by hand. Align the components before tightening; do not use a bolt to pull a misaligned panel into place. Follow Honda’s instructions and avoid overtightening plastic or rubber mountings. Use anti-seize only where the applicable procedure permits it. Check the fitted components are properly seated and secure.
For general background, read our guide to fitting motorcycle fairing bolts. Honda’s workshop procedure takes precedence.
Customer questions
Does this contain all seven 90112-MAT-000 bolts?
No. This listing supplies 4x bolts. The separate seven-bolt kit covers the listed five front and two rear positions.
| Weight | 85 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.