Footrest Hanger bolt kit for Honda CB500F

This model-specific kit supplies replacement bolts for the original rider and pillion footrest hanger-to-frame mounting points on the Honda CB500F 2016–2018. Use the fixings only at their intended mounting positions.

What you receive

• 8x A2 (304) stainless steel replacement bolts for rider and pillion footrest hanger mounts.
• 1x Biker Bling anti-seize compound pack (7 g).

The kit supplies 8x replacement bolts and one anti-seize pack. Honda references identify the original fixings, not Biker Bling product codes.

Important fitment notes

• For Honda CB500F model years 2016, 2017 and 2018 with the original mounting arrangement described above.
• Check modified assemblies against their manufacturer’s required hardware specification.
• Footrests, brackets, heel plates, footpeg pivot hardware and brake components are not included.
• These are aftermarket replacement parts, not genuine Honda-branded components.
• Photographs may illustrate the fastener style; the contents table defines the supplied quantity.

Model-specific replacement bolts

Biker Bling selects these replacement fasteners for the listed original mounting positions. Match each bolt to its intended location; a shared thread or Honda reference does not establish suitability for other assemblies.

Materials: The bolts are A2 (304) stainless steel. Their head appearance may differ from Honda’s originals. The material name alone does not establish equivalent mechanical strength.

When should you replace these bolts?

• Corroded or damaged heads: Inspect worn drive recesses before removal and refitting.
• Damaged threads or missing fixings: Check the bolt and mating threads before assembly.
• During servicing: Inspect the relevant mounting points while accessible.

Replacement bolts cannot repair cracked components, stripped threads or incorrectly seated assemblies.

Fitting information

Support the affected assemblies and align the mounting faces before fitting. Follow Honda’s fastener specification, tightening order, thread condition and torque. Do not use a bolt to pull a misaligned bracket into place. Confirm secure rider and pillion supports before riding.

Use fitting compounds only where the applicable procedure specifies them. The included anti-seize pack is not an instruction to lubricate every fixing. Have damaged or uncertain mountings checked by a qualified motorcycle technician. For general background, read our guide to protecting aluminium mounting threads. Honda’s workshop procedure takes precedence.

Customer questions

Does this include footpeg pivot or heel-plate bolts?

No. It covers the eight hanger mounting positions identified in the table.