Front wheel spindle pinch bolts for the Honda CBR600RR

This four-bolt kit replaces the fixings that clamp the front fork bottoms around the wheel spindle on the Honda CBR600RR 2007–2008. It is for the axle clamps, not the yokes or brake calliper mounts.

What you receive

• 4x A2 (304) stainless steel spindle pinch bolts – 2x for each fork leg.
• 1x Biker Bling anti-seize compound pack (7 g)

Original Honda part reference

90109-MR7-000 – original Honda flange bolt shown 4x in the 2007 and 2008 FRONT FORK fiches, two at each front fork-end spindle clamp. This is an OEM reference for Honda’s original fastener, not the Biker Bling kit part number.

Model-specific aftermarket replacement

The bolts are selected for the original spindle-clamp positions and are aftermarket components, not genuine Honda parts. A2 (304) identifies the material; it does not by itself establish mechanical equivalence to Honda’s original fasteners.

When to replace them

Inspect the heads and threads during front-wheel or fork service. Replace damaged or missing hardware only with the correct specification, and check the fork clamp and spindle for damage as well.

Model-specific OEM replacements: Biker Bling selects the supplied replacement fasteners and fittings for the front axle pinch positions on the fork legs on the Honda CBR600RR 2007–2008, rather than supplying a generic assortment. The critical fitting dimensions match the original Honda fixings for those intended positions. These are aftermarket replacements, not genuine Honda-branded components.

Front wheel fitting

Front axle clamping is safety-critical. Support and align the wheel and fork as Honda specifies, follow the correct tightening order and manufacturer values, and confirm the wheel spins freely and the brake works before riding. Do not ride with a loose or damaged clamp. See our motorcycle bolt strength guide for general material information.