Front spindle pinch bolts for Honda CBR600RR

These 4x bolts secure the front wheel spindle clamps at the bottom of the fork legs on the Honda CBR600RR 2003–2006. They are not the spindle itself, the yoke pinch bolts, brake-caliper mounting bolts or brake-disc bolts.

What you receive

• 4x A2 (304) stainless steel front spindle pinch bolts – 2x per fork leg.
• 1x Biker Bling anti-seize compound pack (7 g)

The front wheel, spindle and fork legs are not included. Photographs are illustrative and may not show the exact pack quantity.

Original Honda part numbers this kit replaces

• 90115-MEE-000 – original front spindle pinch bolt for 2003–2004 models (4 used).
• 90108-MR7-000 – original front axle-holder pinch bolt for 2005–2006 models (4 used).

These are year-group alternatives for the same four clamp positions, not eight supplied bolts. Honda part numbers identify the original fasteners, not Biker Bling SKUs.

Model-specific aftermarket replacements: This set is selected for the original CBR600RR front axle-holder clamps. It is an aftermarket replacement kit, not genuine Honda hardware.

Head style and materials: All four replacement bolts are A2 (304) stainless steel. Stainless steel describes their material; it does not by itself prove equivalence to the original bolts’ mechanical strength.

When should you replace front spindle pinch bolts?

• Corroded or rounded heads: Replace damaged hardware that is difficult to remove or refit.
• Damaged threads or missing bolts: Missing bolts must be replaced with the correct specification. If the bolt or fork-leg threads are damaged, the mounting needs proper inspection rather than simply fitting a replacement bolt.
• During wheel or fork service: Check the bolts and clamp threads whenever the front wheel or forks have been removed.

New bolts cannot repair damaged fork threads, a cracked axle holder or a bent component.

Model-specific OEM replacements: Biker Bling selects the supplied replacement fasteners and fittings for the front axle pinch positions on the fork legs on the Honda CBR600RR 2003–2006, rather than supplying a generic assortment. The critical fitting dimensions match the original Honda fixings for those intended positions. These are aftermarket replacements, not genuine Honda-branded components.

Fitting the front spindle pinch bolts

Important: Front spindle pinch bolts are safety-critical. Confirm the replacement fastener is suitable for this application, support the motorcycle securely and follow Honda’s workshop sequence for spindle installation, wheel alignment and tightening the axle-holder bolts. Use the manufacturer’s specifications for the fastener and thread condition; do not guess a torque value. Our stainless steel bolt fitting guide and bolt strength guide offer general background only.

Before riding, check the front wheel and forks are correctly aligned and secure, then make sure the brake operates normally. If a bolt binds, the threads are damaged or alignment is uncertain, stop and seek qualified help.