Fork-clamping bolts for the upper and lower yokes

This six-bolt kit covers the original upper (top) and lower (bottom) steering-yoke fork clamps on the Honda CBR600RR 2013–2017. It does not include the separate clip-on handlebar clamp bolts.

What you receive

• 2x A2 (304) stainless steel upper yoke fork-clamping pinch bolts.
• 4x A2 (304) stainless steel lower yoke fork-clamping pinch bolts.
• 1x Biker Bling anti-seize compound pack (7 g).

Total: 6x yoke pinch bolts. The forks, steering yokes and clip-on handlebars are not included.

Original Honda fixing references

These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.

Model-specific aftermarket replacements: This kit covers the original upper and lower fork-clamping yoke positions only. The two separate clip-on handlebar clamps use their own bolts, despite sharing the original Honda upper bolt reference. The supplied replacements are not genuine Honda fasteners or a universal bolt selection.

Head style and materials: All six supplied bolts are A2 (304) stainless steel. Head or drive appearance may differ from Honda’s original fasteners. A2 (304) describes material, not proof of Honda-equivalent strength; top and bottom clamp specifications must each be checked.

When should you replace yoke pinch bolts?

• Corroded or rounded heads: Renew damaged fixings that cannot be removed and refitted reliably.
• Damaged or missing bolts: Check the correct specification and inspect the threaded yoke holes before using replacements.
• After fork maintenance: Inspect clamping bolts, mating faces and threads whenever fork legs are removed or repositioned.

New bolts will not repair a cracked steering yoke, stripped threads or fork legs that cannot be held securely in alignment.

Model-specific OEM replacements: Biker Bling selects the supplied replacement fasteners and fittings for the upper and lower steering-yoke fork-clamping positions on the Honda CBR600RR 2013–2017, rather than supplying a generic assortment. The critical fitting dimensions match the original Honda fixings for those intended positions. These are aftermarket replacements, not genuine Honda-branded components.

Fitting the top and bottom yoke pinch bolts

Important: The yokes retain the fork legs in the steering assembly. Support the motorcycle securely, check fork position and follow Honda’s workshop instructions for each clamp, including the correct fastener specification, tightening order and torque. Do not treat the upper and lower fasteners as interchangeable or use bolts to draw a misaligned assembly together.

Inspect the yokes for damage and start threads gently. Our motorcycle bolt strength grades guide and stainless steel motorcycle bolt fitting guide give general information only; Honda’s procedure takes priority. If any original-to-replacement specification is uncertain, have a qualified motorcycle technician verify suitability.

Before riding: Confirm both fork legs are secure and aligned, steering moves freely from lock to lock, and hoses and cables do not pull, rub or snag. If a clamp is damaged, moves or cannot be tightened correctly, do not ride.

Customer questions

Are handlebar clamp bolts included?

No. This kit covers the listed yoke fork-clamping positions only.

Where should I use the anti-seize compound?

Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.